To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Onkyo TX-DS595 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Dolby Processing | Dolby Digital, Dolby Pro Logic |
| Component Video Switching | No |
| Remote Control | Yes |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | 100 dB |
| Output Level | 200 mV |
| Frequency Response | 10 Hz-100 kHz |
| Speaker Impedance | 6-16 ohms |
| Tuner Type | AM/FM |
| Preset Stations | 40 |
| Outputs | A/V output, audio output, subwoofer output |
| Output Impedance | 2.2 kOhms |
| Video Inputs | 3 |
| Video Outputs | 1 |
| Audio Inputs | 6 |
| Audio Outputs | 2 |
| Inputs | 1 phono |
| Weight | 21.6 lbs |
Safety check for insulation before returning appliance to customer.
Instructions for replacing fuses, including part numbers and types.
Procedures for resetting the unit and performing post-service safety checks.
Block diagrams and pin descriptions for digital interface ICs.
Diagrams for CODEC, video amplifiers, and RDS decoder ICs.
Diagrams for analog switches, bus buffers, and TV indicators.
Block diagram and terminal description for the TC9482N volume control IC.
Detailed pinout and function descriptions for the main microprocessor.
Detailed pinout and function descriptions for the sub microprocessor.
How to enter debug mode and compare displays for troubleshooting.
Explains DIR ERROR, DIR STATUS, and analog/digital signal judgment displays.
Interpreting DSP input signal detection and decode status for troubleshooting.
High-level diagram showing major functional blocks and signal flow.
Detailed circuit diagrams for the input stages of the receiver.
