Onkyo UWF-1 User Manual

10.
Damage Requiring Service
Unplug the apparatus from
the
AV
receiver/amplifier and
refer servicing
to
qualified service personnel under the
following conditions:
A.
If
liquid
has
been spilled,
or
objects have fallen
into
the apparatus,
B.
If
the apparatus
has
been exposed
to
rain
or
water,
C.
If
the apparatus does
not
operate
normally by
following
the
operating instructions. Adjust only
those controls
that
are covered by the operating
instructions
as
an
improper
adjustment
of
other
controls may result in damage and
will
often require
extensive
work
by a qualified technician
to
restore
the apparatus
to
its normal operation,
D.
If
the
apparatus
has
been dropped or damaged in
any way, and
E.
When the apparatus exhibits a distinct change in
performance this indicates a need
for
service.
Precautions
1.
Care-Occasionally
you should dust the
unit
all over
with
a soft
cloth. For stubborn stains,
use
a soft cloth
dampened
with
a weak solution
of
mild detergent and
water. Dry
the
unit
immediately afterwards
with
a
clean
cloth.
Don't
use
abrasive cloths, thinners,
alcohol,
or
other chemical solvents, because they may damage the
finish or remove the panel
lettering.
2. Never Touch this Unit with Wet
Hands-Never
handle
this
unit
while your hands are
wet
or
damp. If
water
or
any other liquid gets inside this unit, have it checked
by
your
On
kyo dealer.
En-3

Onkyo UWF-1 Specifications

General

Interface	WLAN
Connectivity technology	Wired
Chipset	-
Internal	No
Product color	Black
Wi-Fi	Yes
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	- Mbit/s
Power consumption	310 mA
Package depth	17.5 mm
Package width	96 mm
Package height	201 mm
Package weight	100 g

Weight and Dimensions

Depth	17 mm
Width	29.8 mm
Height	8.4 mm
Weight	3.4 g