OPERATING CONTROLS
RCR MODEL
40
BATTERY REMOVAL
Removing the battery is very easy but you need to take extreme caution when doing anything related to the battery.
Below are the steps to safely remove the battery for charging it o the bike.
1: Turn the battery switch to the “OFF” position.
Never attempt to unplug the battery with the
battery switch in the “ON” position. Once o
unplug the battery connectors.
2: Unlatch the battery strap and gently place the
buckles on the sides of the bike.
3: To fully remove the battery grab the battery case
handle and lift out the front of the battery rst until it
clears the top of the bike. In the meantime make sure
to gently help the battery cables out of the bike.
To Next Page
Loading...
Need help?
General
