USER MANUAL
V1.0
LETS GET READY TO RIDE!
Okay you are super tempted to ride the bike, but lets get the bike fully charged and
ready to ride before you go ride o into the sunset. The battery is in storage mode
and needs about 50% more energy. If you ride the bike uncharged you could cause
problems with the battery. So lets get started!
The battery and cover should be handled with extreme care. Below are the steps for
proper removal of the cover and battery so you can charge it fully for the rst time.
Once you have removed the battery, you will need to use the provided charger to fully
charge the cells for about 3-4 hours.
QUICK START GUIDE
STEP 1: Unlock the cover gently slide the
wood cover backwards towards the seat.
STEP 3: Now slide the cover as far
forward as possible to be able to lift the
back of the cover o the bike
.
STEP 4: Unlatch the battery strap and
gently place the buckles on the sides of
the bike.
STEP 2: Lift the front of the cover over
the top of the fork’s head tube nut.
P RO-TI P
WOOD IS NOT METAL.
Never force, pry, or hit the
cover or you could cause
major damage to the wood or
worse break the cover.
04 05
To Next Page
Loading...
Need help?
General
