USER MANUAL
V1.0
12 13
BATTERY COVER REMOVAL
The battery cover is made of solid bamboo and should be handled with extreme care.
Below are the steps for proper removal of the cover so you do not break the cover.
Never force, pry, or hit the cover or you could cause major damage to the wood.
BATTERY OPERATION
STEP 1: Unlock the wood cover using the
provided keys.
Pro-Tip: keep one of the
duplicate keys and key-fob in a safe place
so you do not lose all your keys at once.
STEP 3: Lift the front of the cover over
the top of the fork’s head tube nut.
STEP 2: Gently slide the cover backwards
towards the seat.
Note do not re-adjust
the seat forward or there will be no room
for the wood cover to slide backwards.
STEP 4: Now slide the cover as far
forward as possible to be able to lift the
back of the cover o the bike
.
PRACTICE MAKES PERFECT
PART 1
The rst few times might
feel very confusing, but
practice these steps enough
times so it becomes second
nature and you will be able
to keep your cover in perfect
condition. Also take extra
care during Step 4 to avoid
hitting the seat.
P RO-TI P
To Next Page
Loading...
Need help?
General
