EasyManuals Logo
Home>Oracle>Storage>storagetek sl150

Oracle storagetek sl150 Reference Manual

Oracle storagetek sl150
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #204 background imageLoading...
Page #204 background image
Read Element Status
204 SL150 Interface Reference Manual Julyl 2017
Media Type (continued) If the Media Domain field is 4Ch (4Ch is ‘L’), the value reported for the Media
Type field identifies in ASCII the type of LTO cartridge:
1 = The element contains a 100 GB Generation 1 LTO cartridge.
2 = The element contains a 200 GB Generation 2 LTO cartridge.
3 = The element contains a 400 GB Generation 3 LTO cartridge.
4 = The element contains an 800 GB Generation 4 LTO cartridge.
5 = The element contains a 1500 GB Generation 5 LTO cartridge.
6 = The element contains a 2500 GB Generation 6 LTO cartridge.
7 = The element contains a 6000 GB Generation 7 LTO cartridge.
T = The element contains a 400 GB Generation 3 LTO WORM cartridge.
U = The element contains an 800 GB Generation 4 LTO WORM cartridge.
V = The element contains a 1500 GB Generation 5 LTO WORM cartridge.
W = The element contains a 2500 GB Generation 6 LTO WORM cartridge.
X = The element contains a 6000 GB Generation 7 LTO WORM cartridge.
FFh = The media type cannot be determined.
This field is not valid if the Full bit is not set.
Transport Domain The Transport Domain field with the Transport Type field provide a hierarchy
of information that indicates the type of data transfer element installed:
4Ch = The transport supports LTO form factor cartridges (4Ch is ‘L’).
FFh = The transport domain cannot be determined.
Transport Type If the Transport Domain field is 4Ch (4Ch is ‘L’), the value in the Transport
Type field indicates that the drive installed is:
3Bh = An HP Generation 5 LTO drive.
3Dh = An HP Generation 6 LTO drive.
3Eh = An IBM Generation 6 LTO drive.
2Dh = An IBM Generation 7 LTO drive.
FFh = The type cannot be determined.
Transport Serial Number Thirty-two ASCII characters represent the unique transport serial number.
For tape drives with less than 32 bytes of ASCII serial number data, the value
is left-justified and the unused LSB bytes contain ASCII blanks.
If the serial number is not available from a tape drive that should support an
ASCII serial number, ASCII blanks are returned.
Left justification in this 32-byte field provides space for serial numbers of
varying lengths.

Table of Contents

Other manuals for Oracle storagetek sl150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oracle storagetek sl150 and is the answer not in the manual?

Oracle storagetek sl150 Specifications

General IconGeneral
BrandOracle
Modelstoragetek sl150
CategoryStorage
LanguageEnglish

Related product manuals