Request Sense
226 SL150 Interface Reference Manual Julyl 2017
Illegal Request Sense Key
Any illegal parameters in a command descriptor block (CDB) or parameter list for a
particular command generate an Illegal Request sense key (see TABLE 4-125).
In some cases, additional information is available in Byte 15 of the sense data, which
includes the sense-key-specific-value (SKSV) and command/data (C/D) fields. This
information indicates the byte in the command descriptor block or the parameter list,
which is in error.
If available, the SKSV bit in the sense data is set to 1.
See “Request Sense” on page 218 for more information.
TABLE 4-125 Illegal Request Sense Keys
Description Sense Key ASC ASCQ
Invalid Field in Command information Unit (e.g.,
FCP_DL error)
5h 0Eh 03h
Parameter Length Error 5h 1Ah 00h
Invalid Command 5h 20h 00h
Invalid Element 5h 21h 01h
Invalid Field in CDB 5h 24h 00h
Logical Unit Not Supported 5h 25h 00h
Invalid Field in Parameters 5h 26h 00h
Invalid Release of Persistent Reservation 5h 26h 04h
Incompatible Medium 5h 30h 00h
Saving Parameters Not Supported 5h 39h 00h
Medium Not Present, Drive Not Unloaded 5h 3Ah 00h
Destination Element Full 5h 3Bh 0Dh
Source Element Empty 5h 3Bh 0Eh
Magazine Removed 5h 3Bh 12h
Empty Tape Drive Slot 5h 3Bh 1Ah
Insufficient Resources 5h 55h 03h
To Next Page
Loading...
Need help?
General