Oracle SUN Fire X4640 User Manual

Note that selecting a greater number of entries might cause the web interface to respond
slower than if you select fewer entries.
■
View the entries in the display by scrolling through the list - The following table provides
descriptions about each column appearing in the log.
Column Label Description
Event ID The number of the event, in sequence from number
1.
Class/Type
■
Audit/ Log - Commands that result in a
conguration change. Description includes
user, command parameters, and success/fail.
■
IPMI/Log - Any event that is placed in the IPMI
SEL is also put in the management log.
■
Chassis/State - For changes to the inventory and
general system state changes.
■
Chassis/Action - Category for shutdown events
for server module/chassis, hot insert/removal of
a FRU, and Reset Parameters button pushed.
Severity Debug, Down, Critical, Major, or Minor.
Date/Time The day and time the event occurred. If the Network
Time Protocol (NTP) server is enabled to set the
ILOM time, the ILOM clock uses Universal
Coordinated Time (UTC).
Description A description of the event.
Note – The ILOM event log accumulates many types of events, including copies of IPMI entries.
Clearing the ILOM event log clears all entries in the log, including the IPMI entries. However,
clearing the ILOM event log entries does not clear the actual entries posted directly to an IPMI
log.
▼
How to View the System Event LogWith the ILOM Command-Line
Interface
To view or clear the event log, you need the Admin (a) role enabled.
Establish a local serial console connection or SSH connection to the server SP.
See
Sun ILOM 3.0 Supplement for the Sun Fire X4640 Server for more information.
BeforeYou Begin
1
Viewing the ILOM System Event Log
Sun Fire X4640 Server Diagnostics Guide • December 2010, Rev A28

Oracle SUN Fire X4640 Specifications

General

Brand	Oracle
Model	SUN Fire X4640
Category	Server
Language	English