Oracle SUN Fire X4640 User Manual

Resetting the SP
If you need to reset your ILOM service processor (SP), you can do so without aecting the host
OS. However, resetting an SP disconnects your current ILOM session and renders the SP
unmanageable during reset.
This section contains the following procedures:
■
“How to Reset the ILOM SP Using the Web Interface” on page 41
■
“How to Reset the ILOM SP Using the Command-Line Interface” on page 42
▼
How to Reset the ILOM SP Using the We b Interface
■
To reset the SP, you need the Reset and Host Control (r) role enabled.
■
After updating the ILOM/BIOS rmware, you must reset the ILOM SP.
Log in to the ILOM SP web interface.
Select Maintenance –> Reset SP.
The Reset service processor page appears.
Click the Reset SP button.
The ILOM reboots. The web interface is unavailable while the ILOM reboots.
BeforeYou Begin
1
2
3
41

Oracle SUN Fire X4640 Specifications

General

Brand	Oracle
Model	SUN Fire X4640
Category	Server
Language	English