Oricom Secure 710 User Manual

7GETTING STArTED
When the battery charge becomes low on the parent unit
the amber power LED will flash slowly. At this point you
need to return the parent unit to its charging cradle.
When charging, the battery status indicator on the parent
unit screen will change to the charging icon
.
To speed up the charging process, turn the parent unit off
when charging if it is not being used.
Youcancontinuetouseyourparentunittomonitoryour
baby even when the battery is low, provided it remains in
the charger cradle to recharge the battery.
Note
:
•
Th
e parent unit can be kept on the charger even if it is fully
charged. This will not affect the battery life.
• Theparentunitcanbeusedonoroffthechargercradle.
• Whentheparentunitisbeingusedonthechargercradle,
charging time will be extended.
• WerecommendthatyouTURNOFFtheparentunitwhenitis
n
ot in-use, to conserve battery power.
Battery Life
The rechargeable battery pack (supplied) can be charged
and discharged hundreds of times, however they will
eventually wear out and lose their ability to hold a full
charge. When the in use time becomes noticeably shorter
than normal, it is time to purchase a new battery pack.
How to purchase spare parts
YoucanpurchaseBatterypacks(ModelNo:BPCK1500LI)
charging cradles and extra camera units from www.oricom.
com.au
Extra Charging Cradles
For added convenience you may wish to purchase
additional charging cradles online at www.oricom.com.au..
Optimisation of Range
Boththebabyandparentunitshavefoldoutantennas.
The optimal range can be achieved if both the baby unit
and parent unit antennas are extended vertically.
OPERATION

Oricom Secure 710 Specifications

General

Brand	Oricom
Model	Secure 710
Category	Baby Monitor
Language	English