OWC Mercury Elite Pro Dual User Manual

MERCURY ELITE PRO DUAL
INTRODUCTION
3
1.5.1 Rear Features
1. USB 3.0 port — Attach the included USB 3.0 (Standard-A to Standard-B) cable here.
2. Conrm button — Press this button to confirm a newly selected RAID mode.
3. RAID dial — Adjust the position of the dial to change to a new RAID mode.
4. Thunderbolt ports — Attach the included Thunderbolt cable to one of these ports
and to your computer, or to another Thunderbolt device. Use the other Thunderbolt
port to add more Thunderbolt devices to the chain.
5. Power input — Connect the included power supply here.
6. Kensington® Security Slot — Connect a security tether here.
1.5.2 Connectivity Notes
• Only one interface (USB 3.0 or Thunderbolt) at a time can be used.
• Thunderbolt device chains can support up to six Thunderbolt devices.
• There is no power switch on the Mercury Elite Pro Dual. As long as the power supply is
connected, the device will turn on when it receives a data signal through the interface
cable (USB 3.0 or Thunderbolt). If there is no interface cable connected, or if the
computer is off or in a sleep or hibernation mode, the device will turn off.
• For the safe removal of your drive and to assure that no data is lost, always eject or
unmount the drive from your operating system before unplugging the drive.
• In order for the computer to access volumes larger than 2TB, the operating system
needs to support large volumes (e.g., Windows Vista or OS X 10.4 and above).

OWC Mercury Elite Pro Dual Specifications

General

Hot-swap	Yes
RAID levels	0, 1
Storage drive size	3.5 \
Total storage capacity	8000 GB
Number of storage drives supported	2
Interface	Thunderbolt
Product color	Aluminum
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	5 - 42 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	8 - 90 %
Cache internal	128 MB

Weight and Dimensions

Depth	228.6 mm
Width	71.2 mm
Height	133.4 mm