palintest Lumiso Chlorine User Manual

3
Contents
Getting Started 4
Instrument Layout 4
How to Select and Perform a Test 6
Information Messages 12
Keeping the Optics Clean 13
The Settings Menu 14
Using Check Standards 16
Accessing the Results Log 22
Displaying a QR Code 23
Changing Lumiso settings 24
Setting Time and date 24
Adjusting the Display Backlight 25
Using Sample Labels 26
Procedures for Water Testing 27
How to get Accurate Results 27
Blanking 29
Sample Dilution 29
Test Instructions 30
Technical Specification 46
Changing the Batteries 47
Contents

palintest Lumiso Chlorine Specifications

General

Instrument	Single wavelength, direct-reading colorimeter
Optics	LED light source optical system with narrow band wavelength filters and photodetectors
Test Cells	25 mm diameter tubes
Wavelengths	Automatic wavelength selection of 530 nm
Wavelength Tolerance	± 2 nm
Filter Bandwidth	5 nm
Blank/Zero setting	Held in memory, but instrument will prompt for re-blanking after 50 minutes
LCD Display	226 x 138 pixel with adjustable backlight
Results Log	50 results, with date, time and label
Operating Conditions	0 – 50°C 90% Relative Humidity (non-condensing)
Waterproof Rating	IP67 (Waterproof)
Power Supply	3 x 1.5V AA batteries USB Port 6V max, 200mA max (DC)
USB Port	Micro USB Type B

Weight and Dimensions

Size	163 x 70 x 45 mm
Weight	275g (including batteries)