palintest Lumiso Chlorine User Manual

6
How to Select and Perform a Test
This is the basic procedure for all tests. For specific test details
please refer to the Test Instructions.
Lumiso
Pooltest
A Palintest Product
Lumiso
A Palintest Product
C
l
(
0–250
)
C
l

(
0–5
)
12
:
2
8:
4
9
16
-
0
7-
2021
Lumiso
Pooltest
A Palintest Product
Lumiso
A Palintest Product
C
l

(0–250
)
C
l

(
0–5
)
12
:
28
:4
9
16
-
0
7-
2021
The test selection menu
appears when first starting
up Lumiso.
From most other screens,
pressing “back” once or
twice, will take you back to
the test selection menu.
Select a test, using the up and
down keys until the desired
test is highlighted.
These tube icons
will usually appear.
These indicate that the left
key is for “blanking” and
the right key is for “reading”
Please Note: The read icon
only appears after the blanking stage
has been completed. Lumiso will require
blanking to be repeated after 50
minutes or if it registers a significant
change in environmental temperature.
1
2
Blank Read
pressing “back” once or

palintest Lumiso Chlorine Specifications

General

Instrument	Single wavelength, direct-reading colorimeter
Optics	LED light source optical system with narrow band wavelength filters and photodetectors
Test Cells	25 mm diameter tubes
Wavelengths	Automatic wavelength selection of 530 nm
Wavelength Tolerance	± 2 nm
Filter Bandwidth	5 nm
Blank/Zero setting	Held in memory, but instrument will prompt for re-blanking after 50 minutes
LCD Display	226 x 138 pixel with adjustable backlight
Results Log	50 results, with date, time and label
Operating Conditions	0 – 50°C 90% Relative Humidity (non-condensing)
Waterproof Rating	IP67 (Waterproof)
Power Supply	3 x 1.5V AA batteries USB Port 6V max, 200mA max (DC)
USB Port	Micro USB Type B

Weight and Dimensions

Size	163 x 70 x 45 mm
Weight	275g (including batteries)