palintest Wagtech Potalab+ (C) User Manual

41
5
Digital pH Meter
pH Range -2.00 to 16.00
Resolution 0.01pH
Accuracy ± 0.01pH
Slope Range 80% to 120%
mV Range -1999 to +1999mV
Resolution 0.1mV (Between ±199.9mV); 1mV (beyond ±199.9mV)
Accuracy 0.2mV (Between ±199.9mV); 2mV (beyond ±199.9mV)
Temperature Range -10.0 to 110.0°C
Resolution 0.1°C
Accuracy ± 0.5°C
Compensation Automatic/Manual (from 0 to 100°C)
Calibration Points 2 to 5 points
pH Buffer Values USA: pH 1.68,4.01,7.00, 10.01 & 12.45. NIST: pH 1.68,4.01, 6.86, 9.18, & 12.45
pH Slope & Offset Display Yes
Memory 50 Data Sets
Auto Off Selectable
Auto Off Time 20 minutes after last key operation
HOLD Function Yes
Power Requirements 4 ‘AAA’ Batteries; AC/DC Adapter 9V, 200mA
Battery Life > 700hrs (Alkaline Batteries)
Environmental Requirements 0 to 50°C (32 to 122°F) 0 to 50°C (32 to 122°F)
Weight & Dimensions (meter) 18.7 x 9 x 4cm; 290g
Boxed 24 x 23 x 7 cm; 650g
Meter Warranty 3 years
5.6 Technical Specification

palintest Wagtech Potalab+ (C) Specifications

General

Brand	palintest
Model	Wagtech Potalab+ (C)
Category	Measuring Instruments
Language	English

Summary

Kit Layout

Photometer 7500 BT

3.1 Quick Start Guide

3.2 Taking a Sample

Instructions on how to take a representative sample for analysis.

3.3 Starting Up and Battery Replacement

System Lock

3.5 Analysing Samples

Step-by-step guide for performing sample analysis.

Blanking the Photometer

Essential procedure for setting a baseline before sample analysis.

3.6 7500 Test Methods (Fluoride)

Detailed procedure for conducting the Fluoride test.

3.7 Calibration/Validation

Procedures for calibrating and validating the instrument's performance.

3.9 Troubleshooting

Guidance for resolving common issues and error messages.

Bluetooth Issues

Battery/Power Issues

Care and Maintenance

3.10 Technical Specifications

Key technical specifications of the Photometer 7500 BT.

3.11 Palintest Aqua Pal App

Information about the mobile application for data management.

Connecting with the Palintest Portal

Compact Turbimeter

4.2 Start-up and Start Page

4.5 Reading Menu Options

4.6 Taking Readings

Procedures for taking measurements in Normal, Average, and Continuous modes.

4.7 Calibration Menu

Procedures for calibrating the turbimeter using various standards.

Troubleshooting

Guidance for diagnosing and resolving instrument errors and issues.

Technical Support and Warranty

Digital pH Meter

5.2 Keypad Operation

5.3 Meter Preparation

5.4 Calibration Procedures

Important information and steps for calibrating the pH meter.

5.5 Error Messages and Troubleshooting

Lists common error messages and their corresponding corrective actions.

5.6 Technical Specification

Key technical specifications for the Digital pH Meter.

Digital Conductivity Meter

6.2 Keypad Operation

6.3 Meter Preparation

6.4 Calibration Procedures

Information on calibrating the conductivity meter using various methods.

6.4.8 TDS Calibration

Procedure for calibrating the meter for Total Dissolved Solids.

6.5 Measurement Operations

Guidance on taking measurements and managing settings.

6.5.2 Selecting Temperature Compensation mode

6.8 Error Messages and Troubleshooting

Lists common error messages and their corresponding corrective actions.

6.9 Technical Specification

Key technical specifications for the Digital Conductivity Meter.

Digital Arsenator

7.1 Operating Method

Step-by-step guide for operating the Digital Arsenator.

7.2 Technical Specification