What happens if the Panasonic Air Conditioner compressor is not compressing sufficiently?
If the Panasonic Air Conditioner's compressor is not compressing efficiently, the electric current during operation will be approximately 20% lower than the normal value. Additionally, the compressor's discharge tube will become abnormally hot, typically between 70 to 90°C. The difference between high and low pressure will also be almost zero.
General| Brand | Panasonic |
|---|---|
| Model | CS-A7DKD |
| Category | Air Conditioner |
| Language | English |
Details the functions and operation of the remote control for the air conditioner.
Describes the features and functions of the indoor unit.
Describes the features and functions of the outdoor unit.
Provides detailed technical specifications for the CS-A7DKD CU-A7DKD model.
Provides detailed technical specifications for the CS-A9DKD CU-A9DKD model.
Provides detailed technical specifications for the CS-A12DKD CU-A12DKD model.
Illustrates the physical dimensions and layout of the indoor unit and remote control.
Displays the physical dimensions and layout of the outdoor unit.
Explains the parameters and time diagram for heating operation.
Details the cooling operation parameters and time diagram.
Describes the soft dry operation, its parameters, and time diagram.
Explains how automatic operation mode is determined and set.
Covers various operational controls like restart, compressor protection, and timers.
Outlines essential safety precautions to be followed during installation.
Lists the accessories included with the air conditioner for installation.
Provides guidelines for selecting the optimal location for indoor and outdoor units.
Shows a diagram illustrating the indoor and outdoor unit installation process.
Details the procedures for installing the indoor unit.
Provides instructions for installing the outdoor unit.
Explains the process of purging air from the refrigeration piping and indoor unit.
Explains how to identify lead-free printed circuit boards used in the unit.
Details the steps for removing indoor electronic controller components.
Guides the removal of the indoor fan motor and cross flow fan.
Describes the function and operation of the Auto OFF/ON button.
Explains how to reset the remote control to its default settings.
Provides normal pressure and temperature values for diagnosing refrigeration cycle issues.
Details how air conditioner conditions relate to pressure and electric current readings.
Outlines methods for diagnosing compressor and 4-way valve malfunctions.
Shows thermostat characteristics curves for cooling, soft dry, and heating operations.
Presents performance characteristics curves for various operating conditions.
Provides an exploded view of the indoor unit for parts identification and replacement.
Shows an exploded view of the outdoor unit for CU-A7DKD and CU-A9DKD models.
Displays an exploded view of the outdoor unit for the CU-A12DKD model.
Presents the electronic circuit schematic for both indoor and outdoor units.
Shows the electronic circuit diagram for the remote control unit.
Illustrates the print pattern layout for the indoor unit's printed circuit board.
Displays the print pattern for the indicator and receiver PCB.
To Next Page