Panasonic KX-NS500 Getting Started

3.2 PC Connection
Web
Maintenance Console serves as an overall system programming tool for the PBX. The Web Maintenance
Console’s Easy Setup Wizard lets you easily configure the PBX to apply installation settings to enable
communication on an IP network.
To programme the PBX, connect it to the PC via the LAN port.
When connecting the PBX via a Virtual Private Network or the Internet, refer to "5.2 PC Connection" in the
Installation Manual.
Connection via LAN
PC
Switching Hub
LAN Port
LAN
Note
For details about LAN connection, refer to
"4.11.1 LAN Connection for the Main Unit" in the Installation
Manual.
Getting Started 23
3.2 PC Connection

Panasonic KX-NS500 Specifications

General

Analog Extensions	Up to 64
VoIP Support	Yes
System Type	Hybrid IP-PBX
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Humidity	10% to 90% (non-condensing)
Maximum Extensions	288
IP Extensions	128
VoIP Channels	64
SIP Trunks	64
Networking	Yes, supports networking
Built-in Applications	Call Center
Expandability	Yes, via expansion cards and cabinets
Supported Protocols	SIP, H.323, MGCP
Dimensions	430 x 88 x 367 mm