3.3 Starting Web Maintenance Console
System Requirements
For
the system requirements of the PC (operating system, hardware specifications, supported browsers etc.),
refer to "1.2.1 Starting Web Maintenance Console" in the PC Programming Manual.
Connecting to Web Maintenance Console
Note
The contents and design of the software are subject to change without notice.
1. Connect the PC to the PBX:
• Connect the PBX to a network with the LAN port and access the PBX from a PC in your LAN. For
details, refer to "4.11.1 LAN Connection for the Main Unit
" in the Installation Manual.
2. Access Web Maintenance Console:
LAN Connection:
Launch your Web browser and input the IP address of the PBX followed by the Web Maintenance Console
port number into the address bar. The input method will differ according to the PC’s connection to the PBX.
The default IP address for the LAN port of the PBX is 192.168.0.101, and the default Web Maintenance
Console port number is 80. Therefore the address to enter to connect to the PBX for the first time will be
as follows (enter the address exactly as shown):
http://192.168.0.101
Note
The default subnet mask for the LAN port is 255.255.255.0
.
3. The Web Maintenance Console login screen is displayed. Log in with the Installer level account name and
the default Installer level account password to launch the Easy Setup Wizard. For details about the Easy
Setup Wizard, see "4.1.1 Easy Setup Wizard".
Using Web Maintenance Console in Off-line Mode
You can connect a PC to the PBX to programme the PBX using Web Maintenance Console (On-line mode),
or you can programme the PBX without connecting the PC to the PBX (Off-line mode).
Off-line mode programming is performed using the Off-line version of Web Maintenance Console, which you
install on your PC. The changes made during Off-line mode are saved as local data on the PC, and then later
uploaded to the PBX.
The following procedures outline how to install the Web Maintenance Console for Off-line mode programming.
Installation
Note
• Be sure to install the latest version of KX-NS Unified Web Maintenance Console.
• Before
beginning the installation of Off-line Web Maintenance Console, the following software must be
installed on the PC:
– Microsoft .NET Framework 2.0
– Microsoft .NET Framework 4
This software can be downloaded from Microsoft’s online Download Centre.
• To install or uninstall the software on a PC running Windows Vista Business, Windows 7, Windows 8,
Windows 8 Professional, Windows 8.1, Windows 8.1 Professional, you must be logged in as a user in
the "Administrators" group.
1. Copy the KX-NS Unified Web Maintenance Console setup file to your PC.
24 Getting Started
3.3 Starting Web Maintenance Console
To Next Page
Loading...
Need help?
General
