Example: I
f you need to dial the line access
number “9” when making outside calls with a
PBX:
1 9 a MPAUSEN
2 Dial the phone number. a MZN
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.
Answering calls
1 Press MZN when the unit rings.
R You can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
2 Speak into the microphone.
3 When you finish talking, press MZN.
Adjusting the base unit ringer volume
Press MDN or MCN repeatedly to select the
desired volume while ringing.
Note:
R The ringer volume you set is kept for each
line (landline and cellular lines).
Useful features during a
c
all
Hold
1 Press MHOLDN during an outside call.
2 To release hold on the cellular line:
Press MCELL 1N or MCELL 2N.
R A handset user can take the call:
MCELLN
*1
a MbN: Select the
corresponding cellular phone. a
MSELECTN
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 19).
To release hold on the landline:
Press MZN.
R A
handset user can take the call by
pressing M
N.
Note:
R While a landline call is on hold, the
SP-PHONE indicator flashes.
R After holding for 10 minutes, the call is
disconnected.
Mute
1 P
ress MMUTEN during a call.
R The SP-PHONE indicator flashes.
2 To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Flash for landline calls
MF
LASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 45.
For Call Waiting or Visual Call
W
aiting service users
To use Call Waiting or Visual Call Waiting, you
must first subscribe with your phone service
provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a Call Waiting tone.
If you subscribe to both Call Display and
Visual Call Waiting services, the 2nd caller’s
information is displayed after you hear the Call
Waiting tone on the base unit.
1 Press MCALL WAITN to answer the 2nd
call.
2 To switch between calls, press MCALL
WAITN.
For assistance, visit www.panasonic.ca/english/support
27
Making/Answering Calls Using the Base Unit
To Next Page
Loading...
Need help?
General
