18
Preparations/Basics
DVQX1391 (ENG)
Charging the battery
• The battery that can be used with this unit is DMW-BLG10E.
• We recommend charging in a location where the ambient temperature is
between 10 °C and 30 °C (50 °F to 86 °F).
Insert the battery into the camera.
Make sure that the camera is turned off.
To open the socket cover
Press lightly
Keep pressing and
slide
Remove your finger
• The socket cover will be
stored inside the camera.
Closing the cover
• When the cover is
completely closed, it
snaps into place.
Connect to the [USB/CHARGE] socket
[USB/CHARGE] socket
• This terminal is located at the bottom when the camera
is in an upright position.
• Always check the direction of the socket, and hold the plug straight to insert
or remove it. (If the cable is inserted in the wrong direction, the socket could
become deformed and cause faulty operation.) Also, do not insert into the
wrong socket. Doing so may cause damage to this unit.
Charging lamp (Red)
AC adaptor (supplied)
To the electrical outlet
USB connection cable
(supplied)
Computer
Getting ready:
Turn on the computer.
To Next Page
Loading...
Need help?
General
