35
DVQX1391 (ENG)
Recording
Taking pictures with Exposure Compensation
Recording mode:
Corrects the exposure when there is a backlight or when the subject is too dark or
too bright.
• In Manual Exposure Mode, you can compensate the exposure only when the
ISO sensitivity is set to [AUTO].
1
Rotate the Exposure Compensation dial to
compensate the exposure
• You can set the exposure compensation value in
the range between –3 EV and +3 EV.
■
Extending the Exposure Compensation value (Compensating the
exposure with the rear dial)
Preparation
Disable the Exposure Compensation dial
→ [Custom] → [Operation] → [Dial Set.] → [Exposure Dial]
→ [OFF]
Press the rear dial to switch to Exposure Compensation operation
Rotate the rear dial to compensate the exposure
• You can set the Exposure Compensation value in the range between –5 EV
and +5 EV.
• Press
to set the Exposure Bracket. (→45)
• You can set [Flash Adjust.] by rotating the front dial.
Press the rear dial to set
• When [Exposure Comp.] in [Dial Set.] is set to [
] (front dial) or [ ] (rear
dial), you can compensate the exposure simply by rotating the set dial in the
same manner as Exposure Compensation dial operation.
To Next Page
Loading...
Need help?
General
