44
Recording
DVQX1391 (ENG)
Taking Pictures While Adjusting a Setting
Automatically
(Bracket Recording)
Recording mode:
You can take multiple pictures while automatically adjusting a setting by pressing
the shutter button.
1
Set the menu
→ [Rec] → [Bracket] → [Bracket Type]
Press the shutter button to perform recording while adjusting
the exposure.
(Exposure Bracket)
Press the shutter button to perform recording while adjusting
the aperture.
• Available in Aperture-Priority AE Mode or when the ISO
sensitivity is set to [AUTO] in Manual Exposure Mode.
(Aperture Bracket)
Press the shutter button to perform recording while adjusting
the focus position.
(Focus Bracket)
Press the shutter button once to take three pictures with
different white balance settings automatically.
(White Balance Bracket)
2
Press to select [More Settings] and then press [MENU/SET]
• For information on [More Settings], refer to the page that describes each
function.
• If [
] is set, rotate the rear dial to set the adjustment range.
• Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture
• When Exposure Bracket is selected, the bracket display flashes until all of
the pictures you have set are taken. If you change the bracket settings or turn
off the camera before all of the pictures you have set are taken, the camera
restarts recording from the first picture.
■
To cancel [Bracket]
Select [OFF] in step
1
.
To Next Page
Loading...
Need help?
General
