Advanced
46
VQT0V10
• When burst mode is set, the auto review
function is activated regardless of the auto
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
• When the flash is activated or
[STARRY SKY] in scene mode is
selected, you can take only 1 picture.
Economizing Power
Consumption
The brightness of the screen is reduced
and the camera operates in the following
way. Other operations operate in the same
way as recording mode [ ]. Refer to P19
for the setting method.
Conditions:
• When 15 seconds pass without any
operation.
• When 5 seconds pass without any
operation after taking a picture. (Only
effective when [ECONOMY] in the
[SETUP] menu is set to [LEVEL 2].) (P21)
Operation:
• The [MONITOR OFF] message blinks and
then the LCD monitor turns off and the
status indicator lights.
How to turn the LCD monitor on again:
Press any button.
Power save:
The camera turns off and power save mode
is activated when 2 minutes pass without
any operation. Press the shutter button
halfway or turn the camera off and on to
cancel power save mode.
• Economy mode is not activated in the
following cases. (Power save mode is
activated.)
– While the menu screen is displayed.
– While the self-timer is set.
• Power save mode is not activated when
using the AC adaptor (DMW-AC6;
optional).
VQT0V10ENG.book 46 ページ ２００５年１２月２７日 火曜日 午後８時３４分
To Next Page
Loading...
Need help?
General
