Panasonic NN-CS88LBEPG User Manual

54 EN
Select F1 (Drain
Water) by tapping
.
Select F2 (System
Cleaning) by tapping
.
Tap Auto
Cook pad
once.
Tap Auto
Cook pad
once.
F1. Drain Water
Water is pumped through the system to clean the pipes. The water is drained
into the drip tray.
F2. System Cleaning
The rst stage of this program cleans the system with a citric acid solution.
The second stage runs water through the system to rinse the pipes.
Touch Start/
Conrmation.
Empty the drip
tray after the
program has
nished.
Make a solution of
20
g
citric acid and
250 ml of water, add
the solution to the
water tank. Ensure
drip tray is empty.
After the program has
paused, ll the water tank
with water (to max level).
Touch Start/
Conrmation.
The program
will run for
29 minutes.
Touch Start/Conrmation.
The program will run for approx.
1 minute. Empty the drip tray after the
program has nished.
Cleaning Programs
Note
1. Only run this program with 100 g of water in the tank.
2. Do not remove the drip tray during the drain water program.
3. Empty the drip tray and rinse with running water after the program has
nished.
Caution
If the Drain Water program is used directly after a steam cooking program,
hot water may be drained into the drip tray.
Add 100 ml of
water
to the water
tank. Ensure drip
tray is empty.

Panasonic NN-CS88LBEPG Specifications

General

Brand	Panasonic
Model	NN-CS88LBEPG
Category	Oven
Language	English