INPUT MENU ENTER/ +/ VOL
-
/
2
EXIT
2
1
EXIT
s1
s2
s3
s4
22
VOL button
Digital Zoom
This displays an enlargement of the designated part of the displayed image.
Select the area of the image to be enlarged.
Press on the enlargement location to select.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
• The Digital Zoom function cannot be selected while in the following operation state:
When MULTI DISPLAY SETUP is ON (see page 45).
When PORTRAIT SETUP is ON (see page 47).
When SCREENSAVER (except for NEGATIVE IMAGE) is running. (see page 37)
• While Digital Zoom is in operation, “Adjusting POS./SIZE” cannot be used.
Select the magni cation required for the enlarged display.
Each time this is pressed, the magni cation factor changes.
This is shown in the image being displayed.
3
2
4
The cursor will move.
1
Display the operation guide.
Press to access Digital Zoom.
The operation guide will be displayed.
During Digital Zoom, only the following buttons can be operated.
[Remote control]
[Unit]
POSITION /
ACTION button
OFF TIMER button
VOL button
MUTE button
To Next Page
Loading...
Need help?
General