1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENT
ON
DVI-D POWER MANAGEMENT
OFF
OSD LANGUAGE ENGLISH
(
US
)
COMPONENT/RGB-IN SELECT
RGB
SCREENSAVER
POWER SAVE
3D SETTINGS
NO SIGNAL POWER OFF
ENABLE
NO ACTIVITY POWER OFF
DISABLE
EXPRESS SETTINGS
CUSTOM SETTINGS
RESET
EXTENDED LIFE SETTINGS
PICTURE MENU
PICTURE
EXTENDED LIFE SETTINGS
DYNAMIC
SIDE BAR ADJUST
NANODRIFT SAVER
LOCK SETTINGS
PEAK LIMIT
BRIGHT
MID
UNLOCK
APPLY TO CURRENT INPUT
APPLY TO ALL INPUTS
OFF
30
RECOMMENDED SETTINGS
39
EXTENDED LIFE SETTINGS
SIDE BAR ADJUST
Do not display a picture in 4:3 mode for an extended period,
as this can cause an image retention to remain on the side
bars on either side of the display eld.
To reduce the risk of such an image retention, illuminate the
side bars.
This function may be applicable to the non-picture area.
OFF: Darken both ends.
DARK: Make it dark gray.
MID: Make it gray.
BRIGHT: Make it light gray.
Notes:
• To reduce the occurrence of image retention, set the SIDE BAR ADJUST to BRIGHT.
• The side bar may ash (alternate black/white) depending on the picture being shown on the screen. Using Cinema mode
will reduce such ashing.
side bars
4:3 mode
image
retention
Reduces screen image retention
The following settings are setup to reduce image retention:
Image Retention Reduction Menu
“EXTENDED LIFE SETTINGS” enables you to set the following 5 menus (Image Retention Reduction Menu) as
recommended values or set them individually.
PICTURE MENU
PICTURE
“PICTURE MENU” and “PICTURE” are same as “PICTURE” menu items (see page 29). The settings of this menu will be
re ected to the “PICTURE” menu.
Set to the recommended value
Set individually
Reset to the factory settings
Image Retention Reduction Menu
To Next Page
Loading...
Need help?
General