69
Applicable Input Signals
1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENT
ON
DVI-D POWER MANAGEMENT
OFF
OSD LANGUAGE ENGLISH
(
US
)
COMPONENT/RGB-IN SELECT
RGB
SCREENSAVER
POWER SAVE
NO SIGNAL POWER OFF
ENABLE
NO ACTIVITY POWER OFF
DISABLE
3D SETTINGS
This function allows you to reset the unit to the factory setting.
Shipping condition
1
4
5
Press to display the SET UP menu.
Press to select “OSD LANGUAGE”.
Press for more than 3 seconds.
Press to select “Shipping”.
Press to display the Shipping menu.
Press to select “YES”.
Press to con rm.
Wait for 10 seconds, and then turn the power off.
[from the unit]
1 Press the MENU button till the SET UP menu is displayed.
2 Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.
3 Press and hold the ENTER button till the Shipping menu is displayed.
4 Press the Volume Up “+” or Down “–” button to select “YES”.
5 Press the ENTER button and wait for 10 sec.
6 Turn the power off.
2
3
Options
Shipping
Shipping
YES NO
Video input (VIDEO)
Signal name
Horizontal Vertical
frequency(kHz) frequency(Hz)
1 NTSC 15.73 59.94
2 PAL 15.63 50.00
3 PAL60 15.73 59.94
4 SECAM 15.63 50.00
5 Modi ed NTSC 15.73 59.94
To Next Page
Loading...
Need help?
General