Panasonic TH-65PF30U User Manual

1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENT
ON
DVI-D POWER MANAGEMENT
OFF
OSD LANGUAGE ENGLISH
(
US
)
COMPONENT/RGB-IN SELECT
RGB
SCREENSAVER
POWER SAVE
NO SIGNAL POWER OFF
ENABLE
NO ACTIVITY POWER OFF
DISABLE
3D SETTINGS
NO SIGNAL POWER OFF
ENABLE
NO ACTIVITY POWER OFF
DISABLE
1/2
SIGNAL
EXTENDED LIFE SETTINGS
INPUT LABEL
SET UP
OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENT
ON
DVI-D POWER MANAGEMENT
OFF
OSD LANGUAGE ENGLISH
(
US
)
YUV/RGB-IN SELECT
RGB
SCREENSAVER
POWER SAVE
3D SETTINGS
49
SET UP for Input Signals
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the Component / RGB or PC input terminals.
Y, P
B
, P
R
signals “COMPONENT”
RGB signals
“RGB”
Press to display the SET UP menu.
Press to select the “COMPONENT / RGB-IN SELECT”.
Press to select the desired mode.
COMPONENT
RGB
Press to exit from adjust mode.
Note:
Make setting of the selected input terminal (COMPONENT/RGB IN or PC IN).
1
2
3
YUV / RGB IN SELECT
Select to match the signals from the source connected to the DVI input terminals.
YUV signals
“YUV”
RGB signals
“RGB”
Press to display the SET UP menu.
Press to select the “YUV / RGB-IN SELECT”.
Press to select the desired mode.
YUV
RGB
Press to exit from adjust mode.
Notes:
• Selection may not be possible, depending on which optional board is installed.
• Make setting of the selected input terminal (SLOT or DVI-D IN).
1
2
3

Panasonic TH-65PF30U Specifications

General

Brand	Panasonic
Model	TH-65PF30U
Category	Monitor
Language	English