141
English
Shipping condition
It is possible to reset the following data to the factory
settings.
Settings and set values of [Picture], [Sound], [Setup] and
[Position] menus and user image registered in [Setup] -
[Image settings]
■ Remote control
1
Press <SETUP> to display the [Setup]
menu.
2
Select [Options] with and press
<ENTER>.
The following screen will be displayed.
Display information
Software licenses
Cloning password
USB data cloning
Shipping
LAN data cloning
Output log data
3
Select [Shipping] with and press
<ENTER>.
Shipping
Yes No
4
Select [Yes] with and press
<ENTER>.
The message [Shipping ( Wait a moment )] will be
displayed.
5
After the message [Please turn off
the power.] is displayed, turn the
power off pressing <Main Power On /
Off button> ( ).
●
If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.
■ Unit
1
Press <MENU (Unit)> for several
times and display the [Setup] menu.
2
Select [OSD language] with , and
then press and hold <ENTER (Unit)>
for more than 5 seconds.
3
Select [Yes] with <- (Unit)> and press
<ENTER (Unit)>.
The message [Shipping ( Wait a moment )] will be
displayed.
4
After the message [Please turn off
the power.] is displayed, turn the
power off pressing <Main Power On /
Off button> ( ).
●
If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.
To Next Page
Loading...
Need help?
General