To Next Page

To Previous Page

English

Connections

AC cord connection and fixing /

Cable fixing

Back of the unit

AC cord fixing

AC cord (supplied)

Plug the connector into the display unit.

Plug the connector until it clicks.

Note

●

Make sure that the connector is locked on both the

left and right sides.

Unplug the AC cord

Unplug the connector pressing the two knobs.

Note

●

Do not use an AC cord of which the knobs are

damaged. If it is used with the knobs damaged, a

bad connection may result between the AC cord

connector and the AC IN terminal. For the repair of

the AC cord, consult the dealer where you purchased

the product.

●

When disconnecting the AC cord, be absolutely sure

to disconnect the AC cord plug at the socket outlet

first.

●

The supplied AC cord is for this unit exclusive use. Do

not use this for other purposes.

Cable fixing

Note

●

3 clampers are supplied with this unit. Fix the cables

at 3 locations using the holes for clampers as shown

below.

●

Before turning the power on, stop the holes

(3 locations) with the clampers.

Otherwise, foreign objects may enter the holes,

resulting in a fire.

•

If you need more clampers, purchase them from

your dealer. (Available from the customer service)

98-inch model