Pantum M7100 Series User Manual

3. Before loading paper, please unfold the stacked paper to avoid a paper jam or feed
error, and then load the paper into the tray print-side down.The automatic feeder tray can
be loaded up to 250 pages, 80g/m² paper
4.
Raise the output tray to avoid the printed paper from slipping and falling, or immediately
remove the printed document after the printing is complete.
Note:
•
If more than 250 pages (80 g/m²) are put inside the auto feed tray at one
time, paper jam or paper feed failure will be led to.
•
If carrying out single-sided printing, please make sure that the side to be
printed (the blank side) is face down.
•
It is recommended that you raise the output tray to prevent the paper from
slipping and falling after printing. If you choose not to raise the output tray, we
recommend that you immediately remove the printed paper from the printer.
15

Pantum M7100 Series Specifications

General

Brand	Pantum
Model	M7100 Series
Category	All in One Printer
Language	English