Pantum M7100 Series User Manual

8.4.8.1. Steps of duplex original copying
1)
Put an original into the ADF with its front upward and its top fed first; meanwhile, make sure
there are some paper in the carton.
2)
Operate following steps described in Chapter 8.4. Select Duplex Copying and then press
“OK” to save settings.
3)
Press “Start” to begin copying.
4)
Paper exited should be with the direction as shown in the figure:
78

Pantum M7100 Series Specifications

General

Brand	Pantum
Model	M7100 Series
Category	All in One Printer
Language	English