2-7
2.2.3. Loading into Optional Tray
The optional trays can be overlaid for this printer, with each tray loaded with 550 pages
(80 g/
m²
) at maximum. If you need the optional trays, please contact the local distributor from
whom you bought the printer.
Note: • For installation of the optional tray, please refer to Chapter 7.
1. Completely draw out the optional input tray from the printer.
2. Slide the paper-length guide and paper-width guide of the tray to the desired paper size
slot, so as to match with the length and width of the paper.
Note: • Do not overly squeeze the "paper-length guide" and "paper-width guide",
otherwise it will easily lead to deformation of paper.
• To load the Legal size paper, press the release button on the rear of the tray to
draw out the rear, so as to lengthen the tray.
3. Unfold the stacked paper before loading to avoid paper jam or paper feed error, and then
load the paper into the tray with the print-side down; the optional input tray can be loaded with
550 pages (80 g/m²) at maximum.
To Next Page
Loading...
Need help?
General