D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof
Operating Instructions
17
Parker Hannin Corporation
A1.
Standards, directives and provisions relating to the operation of systems in potentially explosive
areas (extract)
1999/92/EC Minimum requirements for improving the safety and health protection of workers
potentially at risk from explosive atmospheres
2004/108/EC Electromagnetic compatibility directive (EMC)
EN ISO 12100:2010 Safety of machinery – General principles for design risk assessment and risk reduction
EN 15198:2007 Methodology for risk assessment of non-electrical equipment and components for
intended use in potentially explosive atmospheres
EN 60079-0:2009 Explosive atmospheres –
Part 0: Equipment – General requirements
EN 60079-7:2007 Explosive atmospheres –
Part 7: Equipment protection by increased safety “e”
EN 60079-14:2009 Explosive atmospheres –
Part 14: Electrical installations design, selection and erection
(IEC 60079-14:2013)
EN 60079-17:2014 Explosive atmospheres –
Part 17: Electrical installations inspection and maintenance
(IEC 60079-17:2013)
EN 60529:2014 Degrees of protection provided by enclosures (IP code)
(IEC 60529:1989 + A1:1999 + A2:2013)
BetrSichV Ordinance on industrial safety and health
TRBS 2153:2009 Technical rules for operating safety
Avoiding ignition hazards as a result of electrostatic charges