37 GB/IE/NI
to the detecting intensity arrows
23
in the display
2
.
Locating wooden
objects
1. Proceed with the search for wood
objects as described in the section
“Locating concealed objects“.
2.
When the product has found an object,
mark it. To be sure that the object is
wood, slide the material switch
3
to METAL.
3. Now search in the same position for
metal. Should the product not find
anything, then the object is wood.
Should it find something, then the
object is metal. In this case, search
again at a different position in the
mode “STUD“ and repeat steps 1 to 3.
Laser marking
The product contains a
Class 2 laser. NEVER
direct the laser beam at
people or animals. NEVER look
To Next Page
Loading...
Need help?
General
