Parkside PAFS 550 A1 User Manual

PAFS 550 A1
GB
│
IE
│
3 ■
Package contents
1 airless paint sprayer
1 paint spray gun
1 intake hose, 1 m, (pre-fitted)
including return hose
1 high-pressure hose, 9 m
1 white HEA filter (pre-fitted)
1 yellow HEA filter
2 nozzles 311 and 517* (*pre-fitted)
1 set of operating instructions
Technical specifications
Motor unit
Rated voltage 230 V ∼, 50 Hz
(AC)
Rated power consumption 550 W
Max. paint flow rate 1250 ml/min
Max. working pressure 110bar
Max. temperature of
coating material 40°C
Protection class I
Protection rating IPX3 Protection
against water spray,
up to 60° compared
to normal operating
position
Paint spray gun
Max. surface temperature 43°C
Max. temperature of
coating material 40°C
Noise and vibration data
Noise measurement value determined in accord-
ance with EN62841. The A-rated noise level of
the power tool is typically:
Sound pressure level L
pA
= 88 dB (A)
Uncertainty K = 3 dB
Sound power level L
WA
= 101 dB (A)
Uncertainty K = 3 dB
Noise measurement value determined in accord-
ance with EN14462. The rated noise level of the
paint spray gun is typically:
Sound pressure level L
pA
= 78.4 dB
Uncertainty K = 2.5 dB (A)
Sound power level L
WA
= 91.2 dB
Uncertainty K = 2.5 dB (A)
Wear ear muffs!
Total vibration value of the
handle a
h
< 5.1 m/s
2
Uncertainty K = 1.5 m/s
2
Symbols on the appliance
Always wear safety goggles.
Always wear a mask.
Always wear ear muffs.
Always wear conductive protective gloves.
Wear non-slip, conductive safety shoes.
Wear protective clothing.
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.

Parkside PAFS 550 A1 Specifications

General

Brand	Parkside
Model	PAFS 550 A1
Category	Paint Sprayer
Language	English