18
GB CY
Maintenance and
cleaning
Maintenance and cleaning
work must always be carried
out with the motor switched off and
the battery removed. Risk of injury!
Have any repair and maintenance
work that is not described in this
instruction manual carried out by
our specialist workshop. Only use
original spare parts. Allow the de-
vice to cool off before undertaking
any maintenance or cleaning work.
There is a danger of burns!
Use cut-protection gloves
when handling the chain or
the chain bar. Risk of cuts!
Switch off the device and remove
the battery before carrying out any
maintenance work.
Cleaning
• Clean the machine thoroughly after
every use. In this way, you extend
the life of the machine and avoid
accidents.
• Keep the gripping handles free
of petrol, oil or grease. Clean the
gripping handles, where appropriate,
with a moist cloth soaked in soap. Use
no solvents or petrol for cleaning!
• Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
• Clean the ventilation slits (7) and
the surface of the machine with a
paintbrush, hand brush or dry cloth.
Do not use any liquids for cleaning.
Maintenance intervals
Regularly carry out the maintenance
operations listed in the following table.
The life of the saw is extended by
regular maintenance of your chainsaw.
Furthermore, you get optimum cutting
performance and avoid accidents.
Maintenance Interval Table
Machine part Action
Before every
use
After 10 hours
of operation
Sprocket chain
wheel (16)
Check for wear/indentations,
replace if necessary
Saw chain (11)
Check oil, regrind or replace
if required
Guide bar (10) Check, clean and oil
Guide bar (10) Turn around
To Next Page
Loading...
Need help?
General