22
GB CY
Dispose of the batteries according to local
standards. Defective or used batteries must
be recycled in accordance with Directive
2006/66/EC. Hand in the batteries at a
used battery collection point where they
are recycled in an environmentally friend-
ly manner. For more information, please
Replacement parts/Accessories
Spare parts and accessories can be obtained at www.grizzlytools.shop
If you have issues ordering, please use the contact form.
If you have any other questions, contact the ”Service-Center” (see page 24).
Position Position Description Order-No.
instruction exploded
manual drawing
10 17 blade bar 91110208
11 16 Saw chain 91110207
12 15 Blade encasing 91110206
Trouble shooting
Problem Possible cause Fault correction
Device does not
start
The battery (13) is empty or not
inserted
Check the charge level, and have
repairs carried out by a quali-
fi ed electrician, if necessary.
Defective On/Off switch (4)
Repair by customer service
Defective motor
Inferior cutting per-
formance
Incorrectly mounted saw chain (11) Mount saw chain correctly
Saw chain (11) blunt
Sharpen cutting teeth or place
on new chain
Chain tension insuffi cient Check chain tension
Saw runs with diffi -
culty, chain comes off
Chain tension insuffi cient Check chain tension
Chain becomes hot,
smoke development
during sawing, dis-
coloration of the rail
Too little chain oil Chain lubrication
contact your local waste management pro-
vider or our service centre.
Dispose of batteries in a discharged state.
We recommend covering the contacts with
an adhesive strip to protect against short
circuits. Do not open the battery.
To Next Page
Loading...
Need help?
General