GB MT
70
Control
Here you can:
- View the mode the mower is currently in
- Read the battery capacity in percent;
- Start or pause automatic mowing
A
;
- Start spot mowing via the Fixed point
selection if the lawn mower is currently in
standby mode.
This function allows you to mow
lawns that are otherwise covered
by seating furniture, playground equip-
ment or similar.
- Via the Station
selection, let the lawn
mower move to the charging station
Error log
Here you can read out the error and time
of the error.
Work log
Here you can read out the operating times
of the lawn mower.
Settings
Here you can:
- Set the total operating time per day under
Operating hours
- Set a device password (PIN) and change
it
- Activate and deactivate the rain sensor
and set a time when the lawn mower
should start operating again after the rain.
You can also specify whether the lawn
mower should make up for the pause in
operating time caused by the rain.
We advise against having the lawn
mower operate while it is raining.
- Settings
If you select the
icon again, you can
assign a new image to the lawn mower
under “Symbol”, you can rename the lawn
mower under “Name” or assign it a “Lo-
cation”.
“Device information” can be called up un-
der this menu item.
“Tap to run and automate” allows you to
run automations you have saved.
“Share device” allows you to grant other
members of the same household access to
the lawn mower via the Lidl Home App.
“Offl ine Message”, when activated, sends
you a notifi cation when the App loses con-
nection to the lawn mower.
“Create group” allows you to create device
groups.
“FAQ” answers frequently asked questions.
“Check for fi rmware upgrade” checks if
the fi rmware is up to date and enables an
upgrade if a newer version is available.
“Remove device” deletes the lawn mower
from your device list in the app.
Also read “Disconnecting the device and
deleting data from the app”.
Privacy policy
The complete data protection guideline
can be found under the tab
in the fi eld
"Data protection guideline".
Disconnecting the device and
deleting data from the app
1. In the tab, select the device that you
want to remove and whose data you
want to delete.
2. Select the
icon in the top right.
3. Select “Remove device”.
4. To delete the data, select "Disconnect
and delete data".
If you just want to disconnect the device
without deleting the data, select “Dis-
connect”.
After you have removed the device in
the LIDL Home app, the device re-
starts and the factory settings are restored.
To Next Page
Loading...
Need help?
General
