GB MT
71
Problems with the app? -
FAQ
1. Select the device you have questions
about from the device list.
2. Select the
icon in the top right.
3. Under "Other" select the option "FAQ"
(Frequently Asked Questions).
Cleaning/maintenance/
storage
Have any work that is not
described in these instruc-
tions performed by an authorised
customer service centre. Only use
original parts.
Before any maintenance or clean-
ing work, switch off the device and
wait for the blades to come to a standstill.
Wear gloves when handling the
blades.
General cleaning and
maintenance work
Never spray down the lawn
mower with water. There is a
risk of electric shock.
• Keep the device clean. Use a brush or
cloth for cleaning, but do not use any
aggressive cleaning agents or solvents.
• Oil the wheels from time to time.
• Check the covers and protective devic-
es for damage and correct fi t. Replace
these if necessary.
Turning/replacing the
blades
The lawn mower is equipped with reversi-
ble blades. If the blades are blunt on one
side, they can be turned over. If the blades
are damaged or show signs of imbalance,
they need to be replaced (see “Spare
parts/accessories”).
1. Turn the device over.
2. Remove blade bolts (34) on the under-
side of the device.
Turning the blades
3. Turn the blades (20) over.
4. Refasten blades with the blade bolts
(34).
Replacing the blades
3. Remove the old blades (20).
4. Refasten the new blades (20) with the
blade bolts (34).
Removing blockages
Wear safety gloves.
There is a risk of injury.
1. Turn the lawn mower over.
2. Open the battery compartment (32) by
removing the 4 screws on the under-
side of the device.
3. Remove the battery (33).
4. Remove the blockage.
5. Reposition the battery (33).
6. Close the battery compartment (32).
Storage
• Store the device in a dry place, out of
reach of children.
• Do not enclose the device in nylon
sacks as this may cause moisture to
form.
To Next Page
Loading...
Need help?
General
