Parkside POF 1200 C2 User Manual

23
MTGB
Content
Introduction .......................................... 23
Intended purpose.................................. 23
General description
.............................. 24
Extent of the delivery
......................24
Functional description
..................... 24
Overview
......................................24
Technical data
...................................... 25
Safety instructions................................. 25
Symbols in the manual
....................25
Symbols on the appliance
...............25
General Safety Directions for Power
Tools
............................................26
Safety notices for milling cutters
.......28
Residual risks
.................................29
Initial operation
.................................... 29
Inserting/changing cutters
...............29
Change collet chuck
.......................30
Connecting the suction adapter
........30
Mounting the parallel stop
...............30
Adjust cutting depth
........................31
Operation
............................................ 31
Switching on and off
......................31
Pre-selecting the rotation speed
........32
Practical tips
......................................... 32
Milling
..........................................32
Edge and prole cutting
..................33
Milling with parallel stop
.................33
Milling with template guide
.............33
Milling with centring tip
..................33
Cleaning/maintenance.......................... 34
Cleaning
.......................................34
General maintenance
.....................34
Storage
................................................ 34
Waste Disposal/environmental
protection
............................................. 34
Spare parts/accessories
........................ 35
Troubleshooting
.................................... 36
Guarantee
............................................ 37
Repair service
....................................... 38
Service-Center
...................................... 38
Importer
............................................... 38
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a nal inspection. The functionality of
your equipment is therefore guaranteed.
It cannot be ruled out that residual quanti-
ties of lubricants will remain on or in the
equipment in isolated cases. This is not a
fault or defect and it represents no cause
for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specied.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Intended purpose
The machine can be used for cutting
notches, edges, long holes and proles,
and it is suitable for contour milling on
workpiece surfaces such as wood, plastics,
light-weight materials or non-ferrous metals.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
For security reasons, the device is not in-
tended for children and young people un-
der the age of 16. Young people aged 16
Translation of the original EC
declaration of conformity
........................ 57
Exploded Drawing
................................ 61

Parkside POF 1200 C2 Specifications

General

Brand	Parkside
Model	POF 1200 C2
Category	Wood Router
Language	English