35
MTGB
Electrical machines do not belong
in domestic waste.
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure
grade, which allows recycling. Ask our
Service Centre for details.
Defective units returned to us will be dis-
posed of for free.
Spare parts/accessories
Spare parts and accessories can be obtained at
www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre via telephone (see
“Service-Center” Page 38). Please have the order number mentioned below ready.
Position Position Description Order No.
instruction exploded
manual drawing
13/22 22-24/73 Set 1: Collet chuck set (6mm / 8mm) 91104251
17 17
Depth stop
91104250
20/30 47/49 Set 3:
Suction adapter
+
Reducer piece
91104252
24/29 63-68/72 Set 2: Parallel
stop
+
guide bars
91104258
25 61
Template guide
91104253
27 69
Combination wrench
91104256
31-36 Set 4:
6-part cutter set
91104255
(MAN / n=max. 35000 / HW)*
31 Prol cutter (
25.0x12.0x8 / R 4 mm)**
32 Rounding cutter (
22.0x11x8 / R 6.3 mm)**
33
V-notch cutter
(
12.7x9.0x8 /
)
90°)**
34 Notch cutter (
12.0x20.0x8)**
35 Notch cutter (
6.0x20.0x8)**
36
Fillet cutter
(
22.0x13.x8 / R 6.3 mm)**
* MAN = approved for manual feeds.
n = max. rotation speed (min
-1
) for which the cutter is approved.
HW = cutting blades are made of hard metal.
** Dimensions of the cutter (mm): Cutter diameter
x length of the cutter head x shaft diameter
R=radiusoftheprole(mm)
)
= angle of the V-notch
To Next Page
Loading...
Need help?
General
