37 GB
Measuring the temperature of a
liquid
Preparation: Pour the liquid to be measured in a
container.
Pull off the protective cap
12
.
Clean the electrode probe
1
and the test liquid
absorption rod
1a
(see “Cleaning the electrode probe
and the test liquid absorption rod”).
Switch on the product: Press
/MODE
5
.
pH
7
is shown in the display.
Press
/MODE
5
again to enter the temperature
measurement mode.
9
is shown in the display
6
.
Dip the electrode probe
1
into the liquid (between
the MIN
2
and MAX
3
markings).
To Next Page
Loading...
Need help?
General
