Parkside PTBM 500 E5 User Manual

5
CY
IE NI
Content
Introduction .................................5
Intended purpose .........................6
General description ......................6
Extent of the delivery ........................6
Description of functions ..................... 6
Over view ........................................ 6
Technical Data ..............................7
Notes on safety............................7
Symbols and icons ...........................8
General notes on safety ....................8
General Safety Instructions for
Power Tools .....................................8
Safety Instructions for Box
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a nal inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
Translation of the original
EC declaration of conformity ......61
Exploded Drawing .....................64
Column Drills ................................. 10
Safety Instructions for Handling
the Laser .......................................11
Safety Instructions for Handling
Batteries ........................................11
Assembly ...................................12
Operation ..................................13
Setting up .....................................13
Selecting the speed ........................13
Checking the V-belts .......................14
Tensioning the V-belts ......................14
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the prod-
uct only as described and for the
applications specied.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party
.
Adjusting the Drilling Bench.............14
Preselecting the Drilling Depth .........14
Changing the Bit ............................ 15
Drilling .........................................15
Adjusting the laser .........................15
Inserting/replacing laser batteries ....15
General Information .......................15
Switching on and off ......................16
Clamping the Workpieces ............... 16
Removing Blockages .......................16
Cleaning and maintenance ......... 16
Cleaning .......................................16
Maintenance .................................17
Storage ......................................17
Transpor t ...................................17
Waste disposal and
environmental protection ...........17
Troubleshooting ......................... 18
Replacement parts/Accessories ..19
Guarantee .................................20
Repair Service ............................21
Service-Center ............................21
Importer .................................... 21

Parkside PTBM 500 E5 Specifications

General

Brand	Parkside
Model	PTBM 500 E5
Category	Drill
Language	English