Parkside PTHSA 20-Li C4 User Manual

GB
40
Troubleshooting
The following table will assist you in fixing faults:
ProblemPossible causeTroubleshooting
Rechargeable battery (21)
not inserted
Inserting the battery (Fig.E)
, p.37
On/Off switch (13) is
broken
contact the service centre.
Rechargeable battery (21)
discharged
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)
Device does not start
Defective motorcontact the service centre.
Internal loose contactcontact the service centre.Device works with interrup-
tions
On/Off switch (13) is
broken
contact the service centre.
Safety cutter bar (1) bluntGrind or replace the safety
cutter bar (1) (service centre)
Nicks on safety cutter bar (1)Check or replace the safety
cutter bar (1) (service centre)
Safety cutter bar becomes
hot
Too much friction due to lack
of lubrication
Lubricate the safety cutter
bar (1)
Too much friction due to lack
of lubrication
Lubricate the safety cutter
bar (1)
dirty blade safety barClean the safety cutter bar
(1)
Safety cutter bar (1) bluntHave the safety cutter bar
(1) sharpened or replaced
(service centre)
Bad cutting techniqueWorking with the device,
p.36
Bad cutting results
Rechargeable battery (21)
discharged
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)

Parkside PTHSA 20-Li C4 Specifications

General

Brand	Parkside
Model	PTHSA 20-Li C4
Category	Trimmer
Language	English