36 . High-Performance Lambda Spectrometers Hardware Guide
2. Check that you have the items listed in the following table.
Part Number Description
L6100126/7 UV WinLab Software Kit (ES/Standard)
L6050009
High-Performance Lambda Spectrometers User Manuals
CD
B0505071 2 single-cell holders
B0142227 Screwdriver 5.5 mm
B0126972 Screwdriver 4.0 mm
L9001764 Long crosshead screwdriver
L9005024 Connecting cable, spectrometer to PC
B0507656 Spare fuse drawer
B0155573 Spare fuses (10 × 3.15 A T)
L6020277 2 × 10% manual attenuators
L6020276 2 × 1% manual attenuators
L6020376 2 × beam block assembly
– Country-specific power lead
NOTE: The two manual attenuators and the beam block assemblies are supplied only with a
Lambda 650 or Lambda 750 spectrometer.
NOTE: The optional 9-pin serial RS232 communications cable (Part No. 09410022) can be
used instead of the new style USB cable and is not included in the above kit.
NOTE: A 25-pin serial RS232 communications cable (Part No. B0180242) was needed for
previous instruments without USB connectivity and not included in the above kit.
3. Examine the components for any signs of damage in shipment:
– Check the entire outer cabinet of the spectrometer for damage, and make sure
that the terminals, fuse holders and so on are not damaged.
– Open and close the sample compartment cover, checking that it moves freely
without binding.
– Make sure that the compartment is free of dust or other foreign matter.
NOTE: In the event of damage or missing parts, file an immediate claim with the authorized
carrier, and inform your PerkinElmer office or Service Representative.
To Next Page
Loading...
Need help?
General
