© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
126
DEVICE OPERATION: NETWORK CONFIGURATION
Network Configuration Tab
The Network Configuration tab allows you to perform actions on all nodes in the network.
Network Node List: manage the Network Node List
Network Upgrade: upgrade firmware on all nodes
Network Password: change the Management Password for all nodes
Network APK Install: install an APK on all nodes in the network
Reboot Network: reboot all nodes in the network
Each action on this tab is the same as the corresponding action on the Node Configuration tab.
Network Upgrade and Network APK install have a box labeled Require All. If this box is checked,
the firmware or .apk file will only be installed if and only if all nodes in the Network Node List are
able to be contacted. If any node is unable to be contacted, the firmware or .apk file will not be
installed on any node. If this box is unchecked, the firmware or .apk file will only be installed on
nodes that are able to be contacted. The firmware or .apk file will not be installed on nodes that
are unable to be contacted.
To Next Page
Need help?
General