11 - 24
Adjustment
11.04.21 Lubrication
Requirement
After a running time of ten seconds a thin film of oil must appear on a paper strip 1 held at
the side of the sewing hook.
● Check that machine has been filled with oil and that oil lines are free of air.
● Run the machine for 2 to 3 mins.
Do not put your hands into the sewing area while the machine is running!
Danger of injury by moving parts!
● With the machine running, hold a paper strip 1 at the hook and check according to
Requirement.
● If necessary, regulate oil on screw 2.
Fig. 11 - 20
1
2