3 Sewing
When the machine is turned on, straight stitch 01 is
selected by default.
Select a stitch
By pressing one of the 27 buttons you select the stitch
illustrated on that button immediately. The stitch
overview on page 8 shows the recommended thread
tension and presser foot for each stitch. After selecting
your stitch, set the thread tension and attach the
recommended presser foot.
Stitch adjustments
Your machine will automatically set the length (A) and
width/positioning (B) for the selected stitch. You can
make your own adjustments to the selected stitch. The
setting changes only affect the selected stitch, and will
be reset to default when another stitch is selected. The
adjusted settings are not automatically saved when
turning your machine off.
Press “-” or “+” once next to the setting you wish to
change. The set value will be indicated in numbers on
the display. Change the set value by pressing the “-” or
“+” button. The LED light (C) next to the setting control
lights up, indicating that the set value is not the default
value. When trying to exceed minimum or maximum
settings a warning sound will be heard.
Note: The default value of a setting will flash on the display
when scrolling through the setting values.
23
To Next Page
Loading...
Need help?
General
