Connect to network
Setup network connection settings in order to use Net TV or network
upgrade functions.
•
The meanings of abbreviations are defined as below.
AP
: Wireless LAN access point
SSID
: Wireless network name
•
The key entry screen will appear when you select SSID, WEP /
others or proxy address.
312
Manual
Easy Connect
Pin code
If your router does not have an easy connect feature, select Manual and press OK.
If your router has an easy connect feature, select Easy Connect and press OK.
anua
asy Connect
de
Cancel
All clear
OK
Text
. , @ ’
g h i
p q r s
a b c
j k l
t u v
_ ? ! - d e f
m n o
w x y z
abc ABC 123+/; Clear
Network settings
•
Enter the key of the selected wireless network using
, then
press OK.
Clear
: Clear the entered number or word.
All clear
: Clear all the entered numbers or words.
abc
: Switch to the small letter mode.
ABC
: Switch to the capital letter mode.
123+/;
: Switch to the numeral and symbol mode.
Cancel
: Shows the cancellation display.
OK
: Set the entered number or word.
1
Press and use to select Setup, then press OK.
2
Use to select Connect to network, then press OK.
312
Cancel
Wired
Wireless
Network settings
Select your connection type.
This TV can be connected to
your home network.
3
Adjust the following items.
Wireless setting
Select to use a wireless LAN to connect to the internet by a wireless
connection.
1
Use to select Wireless, then press OK.
2
Use to select the desired setting, then press OK, and follow the
on-screen instructions.
Easy Connect
Select this setting if your router has an easy
connect button. Start scanning for wireless
networks on the TV after pressing the easy
connect button on your router. If connection test
fails, refer to the router’s manual for more details.
Scan
Search for wireless networks automatically and
select the wireless network name (SSID) from the
list.
Manual entry
Set up the connection to the wireless LAN Access
Point (AP) (e.g. wireless router) manually by
entering the wireless network name (SSID).
* Easy Connect cannot be used when the security protocol is set to WEP.
Change the Access Point’s security mode from WEP to others
(recommended).
Wired setting
Select to use an Ethernet cable to connect to the internet by a wired
connection. Please purchase shielded Ethernet cables at your local store
and use it when you connect to network equipment.
1
Use to select Wired, then press OK.
•
Connection test will start automatically.
p. 40
37 .English
Continued on next page.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
