11. Sources
11.1. Switch to a device
From the list of Sources, you can switch to any of the
connected devices. You can switch to a tuner to watch
TV or play the files from a connected USB Flash Drive.
You can switch to your connected devices to watch their
programme, a digital receiver or a Blu-ray Disc player.
To switch to a connected device:
1 - Press SOURCES to open the Sources menu.
2 - Select one of the item in the source list and press OK.
The TV will show the programme or content of the
device.
One Touch Play
With the TV in standby, you can switch on a disc player
with your TV remote control.
To switch on both disc player and TV from standby and
start playing the disc immediately, press Play on the TV
remote control. The device must be connected with an
HDMI cable and both TV and device must have HDMI
CEC switched on.
26
To Next Page
Loading...
Need help?
General